690 Enduro Forum

Technical => General Maintenance => Topic started by: mcrider on July 05, 2015, 02:56:10 pm

Title: Bizzzzzzzzzzzzzzzzzz!
Post by: mcrider on July 05, 2015, 02:56:10 pm

My '13 690 has bizz on the lower left side as I go thru the gears between 2k & 4k. It is driving me crazy.  Does any one else have that problem? ... did you fix it?

Title: Re: Bizzzzzzzzzzzzzzzzzz!
Post by: brian68 on July 13, 2015, 01:13:10 am

my mirrows buzz at certain rpm's, from vibration.  do you have a aftermarket skid plate?  check around try to rule out everthing simple.

Title: Re: Bizzzzzzzzzzzzzzzzzz!
Post by: stopper90004 on July 13, 2015, 04:43:17 pm

This bike vibrates so much, it shook my flatlands skid plate loose after just three 150 miles rides.  My mirrors vibrate so much,  my wife is envious!  Still, once on the dirt, I'm the one doing all the grinning 8-)

Title: Re: Bizzzzzzzzzzzzzzzzzz!
Post by: brian68 on July 13, 2015, 07:57:23 pm

almost pointless to have mirrows  I can tell something is back there, but cant tell if it is a car,truck,ufo or bigfoot.

Title: Bizzzzzzzzzzzzzzzzzz!
Post by: rednipj on July 13, 2015, 08:48:04 pm

These work surprisingly well for mirrors. They are convex so objects are closer than they appear but they don't shake nearly as bad.
(http://i138.photobucket.com/albums/q265/rednipj/KTM%20690/820A15B4-33E3-454E-B128-F917E6D29347_zpsb0qzfcip.jpg) (http://s138.photobucket.com/user/rednipj/media/KTM%20690/820A15B4-33E3-454E-B128-F917E6D29347_zpsb0qzfcip.jpg.html)

And they are out of sight. Cleaner look.
(http://i138.photobucket.com/albums/q265/rednipj/KTM%20690/706B332F-8522-4F12-97FF-6494EDDD72D7_zpszp9fhbpq.jpg) (http://s138.photobucket.com/user/rednipj/media/KTM%20690/706B332F-8522-4F12-97FF-6494EDDD72D7_zpszp9fhbpq.jpg.html)