690 Enduro Forum

Technical => Armor Up! => Topic started by: estydeez on June 10, 2015, 09:25:47 pm

Title: Meca Systems Radiator Protector Bars
Post by: estydeez on June 10, 2015, 09:25:47 pm

These:

http://www.rallymanagementservices.com/collections/ktm-690-enduro-r/products/radiator-protector-bars-ktm-690-e-r

Anybody here installed them?

I opened up the package and laid out the parts. Frustration. The directions are partially translated from French and I just can't see how the tubes at the top attach to the bike, nor how the tubes at the bottom attach together. I feel like I must be missing some very long set screws.

Would greatly appreciate any insights.

Title: Re: Meca Systems Radiator Protector Bars
Post by: SDMF_Reaps on June 11, 2015, 11:56:55 am

Can you post some pictures of the parts?

Title: Re: Meca Systems Radiator Protector Bars
Post by: estydeez on June 11, 2015, 11:58:41 am

Will do when I get home today.

Title: Re: Meca Systems Radiator Protector Bars
Post by: estydeez on June 11, 2015, 07:51:52 pm

https://photos.google.com/share/AF1QipM_xzsVtayQx-p9LmCyktJdPtMbBzCfHoffMSNwprZcNXtxQspHFk1j5WtBcXUJxg/photo/AF1QipMfVMUQoXXMkIVNRfFQMFMSIL5LsCPR_MWxMSOR?key=dzZBZzl5elFiaVU1ZzI1OFV6Z1RQc0VMb2VSZnR3

Here's the parts. Should I not have three more of the really long set screws? I'm talking about the piece in the center of the picture  that looks like a short section of threaded rod.  I just can't see how the hexagonal  studs attach to anything without those set screws. Also can't help but notice that the studs in my kit look nothing like the round studs on the meca systems webpage.

...I was sold the wrong kit? The bag is marked 690 enduro...

Tried reaching RMS (the vendor) but they are out for the week.

Thanks!