Author Topic: ECU Flash - Which part #?  (Read 347 times)

RiverRunner

  • Explorer
  • ***
  • Posts: 73
  • Karma: +0/-0
    • View Profile
ECU Flash - Which part #?
« on: January 28, 2015, 11:06:44 pm »
Question 1:
I don't know if my dealer is clueless on the reflash issue of MY15 or not. 

Which reflash have you seen used on our bikes with a foam UNI air cleaner and aftermarket silencer (FMF Q4)?

Do you have the part # to help me tell them exactly what to use?

Question 2:
I sent the ECU for my MY12 Husky to a shop in CA and they reflashed it for $45.  Anyone know of a source to reflash the KTM 690 ECU via mail?  That might be an easier option.


Social Buttons


Dirk Diggler

  • Wanderer
  • *
  • Posts: 17
  • Karma: +0/-0
  • Born free, taxed to death!
  • Location: Beverley, East Yorkshire
    • View Profile
Re: ECU Flash - Which part #?
« Reply #1 on: December 09, 2015, 02:36:35 pm »
I use TuneECU to reflash my ECU on the Triumph Tiger.
There are KTM tunes here:-
http://tuneecu.com/KTM_Tune_list.html
Not sure which interface cable the KTM uses, I think it's different to the OBD II Triumph cable...
Costs peanuts for a cable and then you can try a few tunes and use what you like.

RiverRunner

  • Explorer
  • ***
  • Posts: 73
  • Karma: +0/-0
    • View Profile
Re: ECU Flash - Which part #?
« Reply #2 on: December 09, 2015, 04:19:28 pm »
I think the 14/15 Enduro and 13/14/15 Duke ECU has been locked by KTM - the ECU can only be flashed by the dealer.  If you have a way around this, you will be most popular here!

RR

Dirk Diggler

  • Wanderer
  • *
  • Posts: 17
  • Karma: +0/-0
  • Born free, taxed to death!
  • Location: Beverley, East Yorkshire
    • View Profile
Re: ECU Flash - Which part #?
« Reply #3 on: December 22, 2015, 02:51:58 pm »
I think the 14/15 Enduro and 13/14/15 Duke ECU has been locked by KTM - the ECU can only be flashed by the dealer.  If you have a way around this, you will be most popular here!

RR
That will be down to Alain Fontaine and his team. Triumph locked the new Tiger Sport 1050 - they had it **** a year after it's release even though Triumph were adamant it could not be done. It's just a matter of time IMO. Just keep an eye on the TuneECU website or ADV for news - it will happen.