Author Topic: no spark no faults no spark please help  (Read 43 times)

andrewmagas

  • Wanderer
  • *
  • Posts: 1
  • Karma: +0/-0
  • Location: lithuania
    • View Profile
no spark no faults no spark please help
« on: November 16, 2016, 08:32:31 am »
hi everyone

just got a project 690r from 2008
and with no spark
i  pluged it to tuneECU
got no faults

with tuneECU checked ignition coil got plug sparking
got voltage coming from pick up crank sensor

but when i try to start the bike i got no spark at the plug
got good negative on engine

any advice
tryed also unpluging the rollower sensor
or map sensor
didn't help

will really be happy if any ideas will come up

Social Buttons


Philip Pino

  • Adventurer
  • ****
  • Posts: 117
  • Karma: +3/-1
  • Oceanside, CA
  • Location: North San Diego County
    • View Profile
Re: no spark no faults no spark please help
« Reply #1 on: December 17, 2016, 04:18:32 pm »
Andrew, if you haven't fixed the problem yet, try a new battery.  I had an '09 690 Duke that stranded me 30 miles from home when the battery went bad.  The starter seemed to be cranking the engine like normal, but it just wouldn't start.  When I got the bike home I checked everything you did and when I tested the battery it was bad.  New battery installed and it started right up.

I hope this helps.
'14, 690 Enduro R