Author Topic: Recalibrating the Speedo for 17" Wheels  (Read 3891 times)

Rusty Shovel

  • Aimless Ne'er Do Well
  • Administrator
  • Grizzled Adventurer
  • *****
  • Posts: 553
  • Karma: +8/-1
  • Houston, TX
  • Location: Katy, TX
    • View Profile
Re: Recalibrating the Speedo
« on: February 26, 2014, 02:19:57 pm »
I just read the following from the BlakeBlog (http://sobiloff.typepad.com/blakeblog/ktm-690-enduro-faq.html)

Adjusting the Odometer for Different Front Wheel Circumferences

Remove old Odometer and the connector.
Cut the wire for pin 18 (should be Brown/Grey for 690E) on the connector.
Install Odometer
Turn key to "on" and with the meter set to "Trip 1", press and hold "Mode" for 10 sec.
Length xxxx (the 17" circumference) will show up (flashing), press "mode" to increase and "set" to decrease the circumference.
The correct setting for 21" should be 2205.
Press "mode" and "set" simultaneously to set it.
The only thing that the "pin 18" does is lock the Odo from adjusting wheelsize.

***The upshot is: Once the wire is removed, there is no need to re-install it!!***
D==[#)
2014 KTM 690 Enduro R